CLIP ON METAL CEILING SYSTEMS
The Clip On Metallic Ceiling System consists of metal tile manufactured in galvanized precoated steel or powder coated steel offering superior quality ,flexibility and affordability .The Clip on profiles are easily assembled by means of rail connectors to form a sturdy mounting grid for the tiles. The system has already captured the market with many commercial businesses opting for its stylish , practical and long lasting design .State of the art technology coupled with quick and easy installation makes Gabsons Clip On Metallic Ceiling System the ideal solution for all your ceiling requirements .
The Clip On system consists of square tiles .The tiles are simply inserted into the profile by being held in a level position and then applying pressure on the dimple points .Stops in the edges of the tiles ensure a positive lock into the spring tile , yet allow for easy demounting of individual tiles as and when required .GABSONS Clip On Metallic Ceiling System with metal tile (610 mm x 610 mm ) is manufactured out of 0.50 mm thick GP (powder coated ) or prepainted steel as per IS 14246-95 .They have matt finish with least gloss on exposed side and prime alkyd backer on backside .The Galvanization Gr :120 is as per IS:277 .The coating is 4-5 microns epoxy with a prime of +18 microns .Two sides of each tile are raised and piped and stopped to ensure positive engagement into the clip in profile .The suspension system consists of rows of clip on profile made of 0.50 mm thick galvanized steel .The clip -on profiles are spaced at 600 mm c/c to support the tiles . Ceiling angle with thickness of 0.50 mm of size 25mm x 10 mm are suspended from the roof structure by soffit cleat .They are joined to the clip on profiles by hold-on clamps. The tiles are held In place by pressure clips .Wall angle precoated is cold rolled galvanized steel in size 24mm x 24mm x 3050 mm and is used at the perimeter of the wall /partition .
When a sound wave meets an object, part of the sound energy is reflected and the other part absorbed. Sound absorption refers to the reduction of sound energy in a room through a sound wave losing energy through component surfaces.
Metal ceilings fulfil these requirements to the highest level. Due to the material and the smooth surface, they do not absorb moisture. With an additional coating, they can also be used in wet areas.
GABsons metal ceilings can contribute significantly to optimising light reflection depending on the colour brightness, gloss level and size of the perforation. Our standard pure white (similar to RAL 9010) has up to 90% light reflection – measured on an unperforated metal tile.
Good sound attenuation counteracts external acoustic influences that are transmitted via adjoining building components – such as ceilings – into neighbouring rooms and therefore makes an important contribution to sound protection
In order for surfaces to be clinically clean, they must have the ability to be wet washed. The smooth surface enables easy cleaning and the material collects relatively little dirt and humidity. Furthermore, metal ceilings are very resistant to a wide range of cleaning agents and disinfectants.GABSONS metal ceilings are pefect for clean room applications
For rooms in which people reside for long periods of time, attention should be given to the design as well as the acoustic performance of the room, in order to create a harmonious and relaxed ambience. Metal ceilings are ideally suited for individual design and give the space a high aesthetic.
GABSONS metal ceilings have a long product life without loss of quality.They are environment friendly and a perfect reduce -reuse and recycle product